Board Feet Chart — Lumber Sizes & Board-Feet per Piece

A board foot is a volume — 144 cubic inches, or a board 1 in thick × 12 in wide × 12 in long. This chart turns it into a lookup for common dimensional lumber: board feet per linear foot by size, and per full-length piece. Every figure is computed with the same formula ourboard-feet calculator uses, so the chart and the tool agree.

Board feet per linear foot by size

Multiply the board feet per foot value by the length of your board to get the total. Sizes are the nominal dimensions printed on the tag (a "2 × 4" is billed as 2 × 4, not the 1.5 × 3.5 it planes down to):

Nominal sizeThickness × width (in)Board feet per linear foot
1 × 41 × 40.333
1 × 61 × 60.500
1 × 81 × 80.667
1 × 101 × 100.833
1 × 121 × 121.000
2 × 22 × 20.333
2 × 42 × 40.667
2 × 62 × 61.000
2 × 82 × 81.333
2 × 102 × 101.667
2 × 122 × 122.000
4 × 44 × 41.333
4 × 64 × 62.000
6 × 66 × 63.000

Board feet per full-length piece

Handy when a lumberyard prices by the board foot and you are buying standard sticks. Read across from the length you are lifting:

Nominal size8 ft10 ft12 ft16 ft
2 × 45.336.678.0010.67
2 × 68.0010.0012.0016.00
2 × 810.6713.3316.0021.33
1 × 64.005.006.008.00

The formula

Method
Board feet = thickness (in) × width (in) × length (ft) ÷ 12

Divide by 12 because a board foot is 12 in of a 1-inch × 12-inch face. If you work entirely in inches, use (T × W × L in inches) ÷ 144 instead — it gives the identical number. For a whole dimensional load, or to convert board feet to cubic feet and estimated cost, use theboard-feet calculator and the otherwood calculators.

Nominal, not actual. Board-foot pricing follows the industry convention of billing on nominal sizes, so a surfaced 2 × 4 counts as 2 × 4 even though its true section is 1.5 × 3.5 in. Use the nominal number when buying and the actual number when calculating structural weight or fit.

Cite this chart