Unit Conversion Calculators

Convert between metric and imperial units for weight, length, area, volume, and more.

Unit conversion is exact, so any disagreement between two numbers is a slip in the factor or the decimal — not a rounding mystery. These calculators convert length, weight, area, volume, temperature, and more using the internationally defined factors, so the result carries the same precision as the definition behind it.

The tricky ones are not the straightforward scales like meters to feet but the cases people get wrong: temperature, which needs an offset as well as a scale, and area or volume, where the factor is squared or cubed. Each conversion states the exact factor it used.

Where simple factors are not enough

Degrees Celsius to Fahrenheit is °F = °C × 9/5 + 32 — a scale and an offset — which is why “double the Celsius” fails above the freezing point. Square and cubic units compound their base factor: one square meter is about 10.76 square feet, one cubic meter about 35.3 cubic feet.

Getting these wrong is expensive in concrete, fabric, and shipping. The calculator applies the full formula rather than a single multiplier so compounded and offset conversions come out right.

Metric, imperial, and everyday units

The tools cover the usual daily swaps — miles and kilometers, pounds and kilograms, gallons and liters, inches and centimeters — plus cooking and temperature conversions that mix systems mid-recipe.

Because the definitions are exact (an inch is 2.54 cm by agreement), you can use these figures for anything that needs to match a specification, not just for a rough mental substitute.

Quick reference

Exact1 inch = 2.54 cm · 1 foot = 0.3048 m (by definition)
Temperature°F = °C × 9/5 + 32 (offset, not a ratio)
Area/volumeBase factor squared (area) or cubed (volume)
Weight1 lb = 0.45359237 kg exactly

Frequently asked questions

Why is temperature conversion not just a multiply?

Celsius and Fahrenheit set zero at different points, so you need an offset as well as a scale. A pure ratio would only work if both started at the same zero.

Are these results exact or rounded?

They use the defined factors, so they are exact to the precision shown. Rounding only affects displayed digits, never the underlying conversion.

Can I convert compound units?

Common rate conversions (like speed and fuel economy) are supported; for anything exotic, convert numerator and denominator separately and recombine.