Concrete Slab Volume Calculator
Planning a concrete slab project.
Calculate volumes, costs, and material quantities for concrete slabs, columns, footings, and more.
Concrete work fails on arithmetic far more often than on technique. Order a few bags short and you are stopping a pour mid-slab to run to the hardware store; over-order and you are hauling unused pallets back or paying disposal. These calculators convert your slab, footing, column, and footprint dimensions into cubic yards, cubic feet, and bag counts so the number you hand the supplier matches the number you actually need.
Every calculator uses the same underlying volume formula — length × width × thickness — then divides by the yield per bag or per cubic yard. Enter your measurements, pick a mix (premixed 40/60/80 lb bags or site-mixed), and read the result back in the unit a ready-mix dispatcher or lumberyard will recognize.
Start from volume, not from a rule of thumb. A 10 ft × 10 ft slab at 4 inches thick is 10 × 10 × (4/12) = 33.3 cubic feet, or about 1.23 cubic yards. Because ready-mix is sold by the cubic yard and bags are rated by the cubic feet they yield, the same volume drives both answers.
A standard 80 lb bag yields about 0.6 cubic feet, so that same slab needs roughly 56 bags of 80 lb mix; a 60 lb bag yields about 0.45 cubic feet, a 50 lb bag about 0.375, and a 40 lb bag about 0.3. The calculators divide your total volume by those yields and round up so you never finish a corner short. See the bags-per-square-foot chart for these numbers at a glance.
Post footings and round columns are cylindrical, so they use π r² × depth instead of a rectangle. A 12-inch-diameter hole 18 inches deep is a cylinder about 0.44 cubic feet — roughly half a bag — and the calculator handles the π math for you.
Add a small overage for real ground: uneven trench depth and porosity commonly absorb 5–10 percent more than the ideal volume. Order to the calculated figure plus that margin rather than trusting a flat per-square-foot guess. Laying brick or hanging drywall? The bricks-per-square-foot and drywall-sheets-per-room charts answer those the same way.
| Bag yields (approx.) | 40 lb → 0.3 ft³ · 50 lb → 0.375 ft³ · 60 lb → 0.45 ft³ · 80 lb → 0.6 ft³ |
|---|---|
| One cubic yard | 27 cubic feet — the unit ready-mix trucks are priced in |
| Slab thickness | Driveways and paths: 4 in · Structural slabs: 5–6 in |
| Practical overage | Add 5–10% for trench variation and waste |
Bags are priced and sized by how much concrete they yield, not by their weight alone. An 80 lb bag produces about twice the volume of a 40 lb bag, so halving the bag weight roughly doubles the number of bags you need for the same volume.
No — the math is identical. A driveway is just a larger rectangle, often at 4 inches or thicker. Enter its length, width, and thickness and the volume-to-bags conversion works the same way.
Cost scales with volume, so once the calculator has your cubic yards it multiplies by a per-yard or per-bag price. Swap in your local supplier price for a quote that reflects your area rather than a national average.
Planning a concrete slab project.
Getting an accurate cost estimate is a critical first step for any concrete slab project.
Bagged concrete is the go-to choice for small to medium DIY projects — from setting fence posts and building small pa…
Concrete columns provide vertical structural support in everything from residential decks and patios to commercial bu…
A proper concrete footing is the foundation of any structure — it spreads the building's weight across the soil below…
Estimate how much gravel, crushed stone, sand, or topsoil your project needs with our Gravel Calculator.
Estimate the number of bricks your wall project needs with our Brick Calculator.
Estimate how many drywall sheets your room needs with our Drywall Calculator.
Work out how much mulch your garden beds need with our Mulch Calculator.
Estimate the shingles your roof needs with our Roofing Calculator.
Plan your masonry and plastering projects with confidence.
Estimate the cement and sand needed to lay a brick wall with our Masonry Mortar Calculator.
Estimate how much steel rebar you need for any concrete project.
Printable quick-look tables — every number computed with the same formulas as our calculators.