Wood Calculators

Board feet, lumber dimensions, and wood project material calculators.

Lumber is sold in nominal sizes but measured and priced in real dimensions and board feet, which is where most material-order mistakes happen. A “2×4” is actually 1.5 in × 3.5 in, and a lumberyard quotes decking and milling stock in board feet rather than pieces. These calculators convert a project’s pieces and dimensions into board footage and total cost so your estimate matches how wood is actually bought.

A board foot is 12 in × 12 in × 1 in of solid wood — 144 cubic inches. The formula every estimator uses is (thickness × width × length in inches) ÷ 144, and the calculators apply it across all your pieces at once.

From a cut list to board feet

For each stick, multiply thickness by width by length (all in inches) and divide by 144. Six 2×6×10-ft boards are 6 × (1.5 × 5.5 × 120) ÷ 144 ≈ 33.75 board feet once you use the real 1.5 × 5.5 dimensions.

Using nominal rather than actual dimensions quietly inflates or deflates the result, which is why the calculator works from the real sizes mills ship. Enter the count and a single line converts the whole stack.

Rough, planed, and drying allowance

Rough green stock shrinks as it dries and loses more when it is planed to final thickness, so shop orders usually start with a percentage over the net board feet. A common starting allowance is 10–20 percent for drying and planer loss on hardwoods.

Softwood dimensional lumber bought already dried usually needs only a cut-and-waste allowance, not a shrinkage allowance. Match the extra to the stock you are actually buying rather than applying one rule to every species.

Quick reference

One board foot144 in³ — 12 × 12 × 1 in of solid wood
Formula(T × W × L in inches) ÷ 144
Nominal vs actualA 2×4 is 1.5 × 3.5 in · a 1×6 is 0.75 × 5.5 in
Hardwood extraAdd ~10–20% for drying and planer loss

Frequently asked questions

Do I enter nominal or actual sizes?

Enter the actual dimensions you will receive, because that is the real volume of wood. The board-foot math is identical either way; using the true size keeps the total honest.

Why is hardwood priced per board foot?

Hardwood is scarce and milled to order, so it is sold by volume rather than by standard piece size like softwood dimensional lumber. Board footage lets you compare a wide, thick slab and a stack of narrow boards on the same basis.

How many pieces is that board footage?

Divide the total board feet by the board feet in one piece. The calculator gives both the per-piece figure and the total, so you can plan the number of sticks to pull.

Free reference charts

Printable quick-look tables — every number computed with the same formulas as our calculators.