Gravel Tonnage Chart — Cubic Yards, Tons & Bags

Gravel is sold three ways — by the cubic yard, by the ton, or inbags — and switching between them trips people up. This chart covers a100 square-foot area at common depths for five typical materials. Every tonnage figure is computed with the same volume × bulk-density math as ourgravel calculator, so the chart and the tool agree.

Cubic yards and bags per 100 ft² of coverage

Volume depends only on area and depth. Bag counts assume a common 0.5 ft³ bag; for a different bag size, scale them by 0.5 ÷ your bag's cubic feet (a 2 cu ft bag uses a quarter of these counts):

DepthVolume (ft³/100ft²)Cubic yards≈ 0.5 ft³ bags
2 in16.70.6234
3 in25.00.9350
4 in33.31.2367
6 in50.01.85100

Bulk density: tons per cubic yard

To go from volume to weight, multiply by the material's bulk density. These are the exact figures the calculator uses:

MaterialTons per cubic yard
Pea1.4
Crushed1.5
River1.65
Sand1.35
Topsoil1.2

Tons needed per 100 ft²

Read down for your depth and across for your material — this is cubic yards × the density above, rounded to two decimals exactly as the calculator reports:

DepthPeaCrushedRiverSandTopsoil
2 in0.860.931.020.830.74
3 in1.301.391.531.251.11
4 in1.731.852.041.671.48
6 in2.592.783.062.502.22

How these numbers are calculated

Method
Cubic yards = area × depth ÷ 12 ÷ 27  →  Tons = cubic yards × density (t/yd³)

Depth is converted from inches to feet (÷ 12), then to cubic yards (÷ 27). For a real bed with irregular edges, mixed depths, or a specific product, enter your measurements in thegravel calculator, and check theconcrete & landscaping calculators for related materials.

Densities are loose, dry baselines. Wet gravel, quarry dust, and compaction can add 10–25% to delivered weight, and bag sizes vary by brand (0.5 ft³ is typical but not universal). Round your tonnage up, and confirm the density your supplier quotes if the load is priced by weight.

Cite this chart