Tiles per Square Foot Chart

How many tiles does your floor or wall need? This reference answers it at a glance for the most common ceramic and porcelain sizes — from 3 × 6 subway to 18 × 18 large-format. Every figure is computed from each tile's face area using the same math as ourtile calculator, so the chart and the tool never disagree.

Tiles per square foot by tile size

A square foot is 144 square inches, so tiles per square foot is simply 144 ÷ (length × width). Read your size for the base count before waste:

Tile size (in)Face area (in²)Tiles per ft²Tiles per 100 ft²
3 × 6 (subway)188.00800
4 × 4169.00900
6 × 6364.00400
8 × 8642.25225
10 × 101001.44144
12 × 121441.00100
6 × 24 (plank)1441.00100
12 × 182160.6767
12 × 242880.5050
18 × 183240.4445

Reading the per-100 column

The tiles per 100 ft² column is the fastest way to size a buy: for a 250 ft² floor using 12 × 12 tile, take 2.5 × 100 = 250 tiles; for 6 × 6, 2.5 × 400 = 1,000 tiles. Counts are whole tiles rounded up, exactly as the calculator rounds.

Tiles for common rooms

Floor areas for typical rooms, shown against the two most popular formats at 0% waste — add your waste allowance (10% straight lay, 15% diagonal) before ordering:

RoomDimensionsArea (ft²)12 × 1212 × 24
Small bathroom5 × 8 ft404020
Bathroom8 × 10 ft808040
Kitchen floor10 × 10 ft10010050
Bedroom12 × 12 ft14414472
Large living room16 × 20 ft320320160

How these numbers are calculated

Method
Tiles = ⌈ floor area (ft²) × 144 ÷ (tile length × tile width) ⌉

There is no hidden rounding trick — the ×144 converts square feet to square inches, divide by the tile face area, then round up. Grout joint width is not deducted here (it is small relative to tile size); for tight mosaics or a complex cut pattern, enter your real room and tile dimensions in thetile calculator, and pair it with theflooring calculators for underlay and transition pieces.

Small-print honesty: nominal sizes (a "12 × 12" tile) can vary by a fraction of an inch by manufacturer, and rectified edges change spacing. Treat this as the standard-size baseline, add 10–15% for cuts and waste, and buy all tiles from one dye lot so a later touch-up matches.

Cite this chart