Bricks per Square Foot Chart

How many bricks does your wall need? This reference answers it for the four common US face sizes —standard, modular, queen and king — with the mortar joint already built in. Every figure iscomputed from each brick's face area using the same math as ourbrick calculator, so the chart and the tool agree.

Bricks per square foot by brick type

Face dimensions below include the standard 3⁄8 in mortar joint, which is what actually sets spacing on the wall. Bricks per square foot is 144 ÷ (length × height):

Brick typeFace incl. mortar (in)Face area (in²)Bricks per ft²Bricks per 100 ft²
Standard8 × 2.2518.008.00800
Modular7.625 × 2.2517.168.39840
Queen8 × 2.7522.006.55655
King9.625 × 2.7526.475.44545

Reading the per-100 column

The bricks per 100 ft² column is the quickest buy check: a 250 ft² wall of standard brick is 2.5 × 800 = 2,000 bricks; the same wall in queen is 2.5 × 655 ≈ 1,638 bricks. Counts are whole bricks rounded up, exactly as the calculator rounds.

Bricks for common walls

Wall areas (length × height) for typical runs, shown for the two most common facing bricks at 0% waste — subtract openings and add 5–10% for cuts and breakage before ordering:

WallDimensionsArea (ft²)StandardModular
Garden wall section8 × 8 ft64512538
Feature wall12 × 8 ft96768806
Garage wall16 × 8 ft12810241075
House side24 × 8 ft19215361612
Long boundary30 × 8 ft24019202015

How these numbers are calculated

Method
Bricks = ⌈ wall area (ft²) × 144 ÷ (brick length × brick height incl mortar) ⌉

Divide the wall's square feet (converted to square inches) by each brick's face area, then round up. For a real layout — with doors, windows, wall ties, or a specific joint thickness — enter your dimensions in thebrick calculator, and pair it with themortar calculator to order brick and mortar together.

Small-print honesty: face sizes here follow the common nominal modules, but manufacturers vary by a fraction of an inch and laid height changes course spacing. Treat these as the standard-material baseline, subtract openings, and add 5–10% for cuts and breakage before ordering.

Cite this chart