Mortar Volume = Wall Volume − Brick Volume
The mortar in a brick wall only occupies the joints — the bed joints between courses and the perpends between bricks. The cleanest way to size it is to take the full volume of the wall and subtract the volume of all the bricks. What remains is the joint volume, which is essentially the wet mortar you need. This is exactly what the calculator does from your wall dimensions and brick size.
Joint Thickness Drives the Answer
A typical face-bond brick is about 2.25 in tall, but with a 3/8 in mortar joint the effective height grows to 2.625 in. That thin joint is easy to underestimate: over a tall wall the mortar adds up fast. Always let the joint be part of the brick count, not an afterthought.
Turn Mortar Volume Into Cement and Sand
Once you have the mortar volume, split it by your mix ratio. Common masonry mortars run from a strong 1 part cement to 3 parts sand, up to a workable 1:5 or 1:6 for general above-grade walls. Buy the dry mix, though — mortar shrinks when water is added and you lose some to cutting and waste, so allow roughly 25-30% extra over the calculated wet volume.
Worked Estimate
For a 20 ft × 8 ft wall that is 8 in thick, the wall volume is 20 × 8 × (8 ÷ 12) ≈ 106.7 ft³. Standard bricks take up about 80% of a well-laid wall, leaving roughly 20 ft³ of mortar. At a 1:4 mix that is a little over 40 bags of cement plus the matching sand — before waste. Order a touch more than the raw figure and you will not be stopping mid-wall to make a run for material.
Related Masonry Tools
Start with the brick calculator to get the brick count, then come back here for the mortar. If you are mixing your own rather than buying pre-blended mortar, the cement mortar calculator breaks the same volume into bags of cement and cubic feet of sand.